Last updated: November 26, 1999

2.3GB 8 mm Tape Drive

Sun-4/370/390/470/490
SS670MP / SS690MP

Options 566 / 802 / 804

370-1297	370-1405
Exabyte EXB-8200 Black Bezel	Exabyte EXB-8200 Light Grey Bezel

Rear View

Jumper P2

SCSI ID (MSB) 1 2 (LSB) 3

4 In Out Out

5 In Out In

3 Out In In

2 Out In Out

1 Out Out In

0 Out Out Out

Address Select Switch Cable

In the Desktop Storage Module and External Storage Module, orient the Address Select Switch Cable as shown, and plug it into P2.

Power

4.0 Amps @ +5Vdc

1.2 Amps @ +12Vdc

34.4 Watts

MX Card

Dip Switch U32

SWITCH SETTING DESCRIPTION

1 On Bypass memory test

2 On Enable parity checking

3 On Even byte disconnect

4 Off Report busy status

5 On Variable block mode on power up

6 Off No disconnect during data transfer

7 Off Not used

8 Off P6 cartridge type

Manual Eject Switch

Notes

The 112 Meter Tape part number is 370-1298-01.
The Cleaning Kit part number is 370-1318-01.
ECO WO_01575 enabled Parity checking on the MX card. Parity checking is disabled on drives shipped prior to December 1991.

Reference

Sun 2.3-Gbyte 8mm Tape Drive Configuration Procedures for 56-Inch Data Center Cabinets, 813-2081.