SUN 4/370
MIPS
16
MFLOPS
2.6
SPECmarks
11.3
MEMORY
8/32MB standard for station; 32MB standard for server
24 or 48 MB boards; 1 per system
1 MB SIMMs used; total of 72 MB
slot 3 is used for memory expansion
the 370 uses parity memory for cost saving
for more details on memory error recovery
search for memrecover
MONITOR
monochrome(1152x900); color (CXP); 19"
PACKAGE
26" 12 slot VME bus cabinet
PROCESSOR
Cypress CY7C601, 25 MHz
CPU
25Mhz, 16 mips
FPU
FPU is TI8847 25Mhz, 2.6 Megaflops
MMU
16 contexts, 1GB address space in each
CACHE
cpu has 128KB write-through cache
the 370 does not have an i/o cache because
with SMD drives it achieves very high performance
PERIPHERALS
1/4" tape, disk
PORTS
4 rs232/423 ports on cpu board
TAPE
tape is 150MB SCSI 1/4" tape
FL 6250/1600 HP tape drive
the HP can stream a 135MB partition in 5 minutes
the max 1/2" tape drives is 3, up to two
in one expansion cabinet. One FL tape
takes up the same space as 4 IPI's
DISK
6.8GB of Disk capacity
5.5GB (8 688's SMDs) can be put in two exp. pedestals
1.3GB ( 2 669's internal to the main cabinet)
SCSI
up to 4 internal scsi devices; CD-ROM and 1/4" tape
standard; can have up to 2 669MB scsi disks
BUS
VME 12 slot, (2) 5 1/4"
devices 1/2" tape in a single CPU enclosure
each expansion rack can have up to 16GB
there is max of two expansion racks
GRAPHICS
GXP - 24 bit 3D solids
supports the TAAC, VIDI/O board
GX - 2D/3D wireframes; 8 bit
OPTIONS
(1) Ethernet; (1) FDDI controller; ALM-2's; TAAC-1 accelerator
OPERATING SYSTEM
4.0.x and above
POWER
power supply is 200-240VAC, 925 watt auto-ranging
expansion cabinet needs 410 watt power supply
DBA
< 55 dba for CPU and < 65 dba for expansion rack
SERVER
up to 68 users; 10-20 diskless clients
UPGRADE
to 470; consist of a new backplane, 32MB ECC memory
board, SCSI-3 host adapter; SMD and IPI drives
supported; cannot exceed two expansion pedestals or
8 disks
NOTE
DISCONTINUED December 14, 1990
CODENAME
Stingrock
Date this file was last modified
December 26, 1995